|Minimum Order Quantity||1 Piece|
|Disinfection For||Humans, Material|
|Chemical Tank Capacity||100ml to 500ml|
|Type of Machine||Mini fogging|
|Machine Fuel Type||Push Sprayer|
|Number Of Knobs||1|
This Machine is specially made for Hospital, Offices, Residence and Car.
Appearance color: white
Smoke output: 2000 cu.ft / min
Oil tank volume: 100 ml
Warm-up time: 3 minutes
Packing size: 37 * 24 * 37cm
Weight: 3.7 kg
Disinfection time: continuous disinfection
Item Specifications:Appearance color: white
Instructions for use:
The indoor atomization and anti-bacterial machine (atomization machine) connected to 220V power supply, open the warm-up for 3 minutes, to be the handle button light,said atomization machine can work.
Handle operation: press the handle to the button button, atomization machine work;release the handle button, atomization machine to stop working.
Indoor atomization and antimicrobial (atomization machine) The use of non-steam dry smoke to disinfect the ingredients to the car has a smell of the part. Which play a decomposition of odor, sterilization deodorant effect. And with a scent to purify the air.
Automatically smoke, the bike to purify the smoke 5-8 minutes, and then open the car within 10 minutes after the smoke adsorption is completed, and then open the door to feel healthy and fresh air.
Spraying antibacterial disinfection machine steps: For Car:
Step 1 : start the car, the car is inside the cycle, the wind speed is 3 files, and the cold air is opened. Power on the machine into the front passenger seat row and open the red switch button on the back of the machine.
Step 2: Wait for 5 minutes for preheating, wait until the handle light is on. Then press the timer switch (4 ml to 100 ml of potion. Please set 4 or more below 80 ml.)
The third step: atomization for about 3 to 5 minutes, the liquid medicine is sprayed off the machine, take out the machine, continue the inner circulation for about 15 minutes, let it fully absorb.
The fourth step: ventilate, cycle outside for 3 minutes, the entire construction is completed, check the switch off and deliver.
After the machine is finished, it is best to use a clear water spray. Keep the machine piping clean and unobstructed to prevent blockages from affecting machine operation.
Connect the machine to the power supply, press the black switch to the left cleaning position, turn the timing knob to about 2 steps, and rinse the machine pipe with clean water or clean tap water.